Video Transcript for Review of Stromberg Carlson Replacement Motor - SC68QR

Hello, neighbor, Steven here with etrailer.com. Let's take a look together at our replacement high speed motor for your Stromberg Carlson Electric Landing Gear rated at 5,000 pounds. So folks, this does replace that motor on their fifth wheel in the gear. Maybe it burnt it up or burnt out, or it's just worn out. Or maybe you want to go with a high speed motor versus a low speed possibly. Now this can be used with most electric landing gear sets, including Venture, Lippert and Pac-Rim.

It is designed with the Stromberg Carlson models, LG-3 and LG-4. Now it does wire to the switch that originally came with your landing gear set. If you need a replacement motor control switch, that is sold separately, I'll put that on on the screen for you as well. Now this is a single speed motor, so it's not gonna trip circuits or cause problems while the coach's electrical system is running and everything, you get your positive and ground wires. You got the part here that connects to the rod to actually move the landing gear and everything.

And you've got the two bolts here that go through for mounting this in place and everything. So a nice replacement motor. And as far as some measurements, when I was going center to center length ways, I was getting 4-1/8". As far as some dimensions, this guy is 8-1/2" tall overall, it's about 3-3/8" wide. And as far as this other width, the longer side is 4", right at 4".

Now this motor speed uses 10 gauge wire. It's weighted at 5,000 pounds capacity, and it does hit a motor speed of 150 RPMs or revolutions per minute under a full load. So folks, this is just a nice replacement motor here for you, this is the Stromberg Carlson Electric Motor. I'm Steven, thanks for watching.